When the router's signal is not good, adjust it this way
- Release on:2018-08-09
Now every family has installed a router, but its signal is not very good, what is the cause?
First, it could be that the router is positioned in an incorrect position. Many times we can unconsciously place the router next to some appliances, especially as some refrigerators, microwave ovens and other appliances with strong radiation, because these appliances will emit strong electromagnetic waves, and these electromagnetic waves will also affect interfering with the normal operation of the router, which it affects the WiFi signal we use and affects the speed of the Internet. In addition to being away from some appliances that release electromagnetic waves, the load-bearing wall should also be avoided, because our routers use radio waves to exchange signals. If the wall is too thick, the signal will be affected. What we hear is the signal. It is weak and the load-bearing walls of residential buildings are generally relatively thick, so take special care to place the router away from the load-bearing wall.
Secondly, the router and the metal objects are too close. Since the metal object also releases the magnetic field to the outside, if it is too close to the router, it will play a shielding role, it will protect the router's signal, it will affect our normal Internet access and network speed.
Third, the network signal is destroyed. Now every family is very close, it's almost a wall. If there are too many devices connected to the router at home, it is equivalent to a certain amount of network bandwidth traffic scattered too much, so the signal is too weak when we use the network, even There may be a phenomenon of falling the network.
For the above cases, we can see that the following countermeasures have been taken.
First of all, if you use a wireless router at home, keep in mind that it is better to place the router in a central position in the room, making sure that the router's signal can extend the signal to each position in a concentric circle. Also, when positioning, be careful to avoid some electrical or metal objects with strong radiation and release electromagnetic waves, then move away from the load-bearing wall or thicker walls, so as not to weaken the router's signal.
Secondly, the wireless antenna and the router are positioned together and positioned vertically. It is also important to note that since the center of the antenna is the coverage area of the signal, avoid pointing the antenna at the wireless terminal.
Third, for the network problem, we can change the router settings at home and the WiFi network password, so as to eliminate the network, our router signal will become stronger, and the Internet speed will naturally be super fast.
Fourth, home routers may be old due to long-term use. We can use the router's signal amplifier to improve the quality of the router by assisting external devices